SBE804 no.7290-1/3 features ? low forward voltage (v f max=0.55v). ? fast reverse recovery time (t rr max=10ns). ? composite type with 2 diodes contained in the cph package currently in use, improving the mounting efficiency greatly. ? the chips incorporated are both equivalent to the sb02-03c. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit repetitive peak reverse voltage v rrm 30 v non-repetitive peak reverse surge voltage v rsm 35 v average output current i o 200 ma surge forward current i fsm 50hz sine wave, 1 cycle 2 a junction temperature tj --55 to +125 c storage temperature tstg --55 to +125 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit reverse voltage v r i r =50 m a30v forward voltage v f i f =200ma 0.55 v reverse current i r v r =15v 15 m a interterminal capacitance c v r =10v, f=1mhz 6.3 pf reverse recovery time t rr i f =i r =(--)10ma, see specified test circuit. 10 ns thermal resistance rth(j-a) 300 c / w note : the specifications shown above are for each individual diode. marking : sg ordering number : enn7290 SBE804 30v, 200ma rectifier package dimensions unit : mm 1294 [SBE804] o1002 ts im ta-3611 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. silicon schottky barrier diode 1 : cathode 2 : cathode 3 : anode 4 : no contact 5 : anode sanyo : cph5 1.6 0.6 0.6 2.8 0.2 2.9 0.05 0.4 0.95 0.2 0.9 0.7 0.15 0.4 12 3 4 5 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan
SBE804 no.7290-2/3 1.0 10 5 7 2 3 7 5 100 2 3 7 5 2 3 5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 i f -- v f itr10723 itr10724 25 c ta=125 c 2 5 0.01 0.1 2 5 1.0 2 5 10 2 5 100 2 5 1000 0 5 10 15 20 25 30 35 i r -- v r 1.0 10 3 2 5 3 2 5 7 357 2 1.0 357 2 10 100 c -- v r itr10725 f=1mhz 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 72357 0.01 0.1 23 23 57 1.0 i s -- t itr10726 ta=125 c 100 c 75 c 50 c 25 c forward voltage, v f -- v forward current, i f -- ma reverse voltage, v r -- v interterminal capacitance, c -- pf reverse voltage, v r -- v reverse current, i r -- a time, t -- s surge forward current, i s (peak) -- a i s 20ms t current waveform 50hz sine wave electrical connection t rr test circuit 12 53 (top view) 4 1 : cathode 2 : cathode 3 : anode 4 : no contact 5 : anode duty 10% 50 100 10 --5v t rr 10 s 10ma 10ma 1.0ma
SBE804 no.7290-3/3 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of october, 2002. specifications and information herein are subject to change without notice. ps
|
